X-elixis ****Underground***

X-elixis news

Here you will find all
x-elixis underground news,
directly from the source!
--------------------
For the moment we have taken the bigest share of Xbox modchips in GR market We will invest our profits to get a bigger production
of X-elixis 3 Dimension,
and be able to provide you with lower prices!
---------------------
Meanwhile a new
Press&Fit Technology
will be tested soon,
as a steady and safe solution, with NO Soldering!
---------------------
For this reason we will not support X-elixis clone,
but it is available for use
by any other cheapmod user!
---------------------
Compatible modchips are:
- cheapmod -
- ozxchip -
- applex -
- alladin -
and generally any other modchip that is using Numbnuts SST49LF020 solution for Xbox!
----------------------
This Plug&Hack installation,
can also be used
by executer 2,
and generally by any other mod that is using pin header for the installation,
with small modifications.
-----------------------
If you still want a ready Plug&Hack mod,
we recomend you to use
X-elixis 3rd Dimension!
----------------------
----------------------
X-elixis 2 coming soon!
featuring:___________
Plug&Hack
Plug&Program
Press&Fit Installation!
----------------------
www.grmods.com

- Lpcmod -Make an X-elixis Plug&Hack clone!
Step#1 : Make a clone of X-elixis LPC Connector Use a common type Pin Header 2x6 (2.56 mm pitch) By pulling the pins with nippers you can remove them.
Solder a wire in the bottom point, of the pin, as in the photo.
Pull the pin up
Cut it in the same high with the other pins, and you have a cheap clone X-elixis Lpc Connector!

X-elixis 3D is now available!
for orders sales@x-elixis.com

Step#2 : Make a clone of X-elixis Plug-In Find a compatible socket to the Pin Header, and do the following steps: 1. Cut 2 pins. 2. Bend and solder the pin, as shown in the photo.
Solder the pins from the top side of Lpcmod pcb, and build your own Plug&Hack mod!

Go Back to Lpcmod - the Ultimate Tool for Xbox

	Install the Pin Header to Xbox LPC bus, and solder "D0" point
	Thanks to X-elixis original idea, now you can Plug&Hack with your cheapmod, or Unplug&Unhack!

Go Back to

Go Back to X-elixis Underground News