Review at: www.xbox-info.com
coming soon: www.ps2ownz.com
www.xboxhacker.net
 
/ X-elixis Installation help / How to Open Xbox


How to
Open Xbox
  Only 10 screws needed to Open your Xbox and Install
X-elixis LPC connector.
This must be done once,
and with Xtention Switch,
you get access for upgrades
with your console closed!
  
 
 
  The installation of X-elixis require from you to open your Xbox console,
and and voide the guarrantee.		  
Unscrew these 6 screws,
with a T20 screwdriver.
Lift the upper protective cap,
from the back side of Xbox.
Unplug the 2 wads,
that are connected
to the Hard Drive.
Unscrew the screw that is connecting the Hard Drive to the CD-Rom, with a T10 screwdriver.
Unscrew the 2 screws that are holding CD-Rom,
with a T10 screwdriver.
Unplug and Remove DVD-Rom,
from the mainboard.
  Disconnect the 3 wads from the mainboard, the board of joystic,
and unscrew all the screws from the mainboard with T10 screwdriver.		  
Remove Xbox motherboard,
to gain access in the underside..