Program
your cheapmods /
 |
| |
With
X-Adaptor you can program your cheapmod variaties,
including cheapmod, lpcmod, ozxchip, alladin, applex...
For this perpose you you just need Evolution-X Software,
X-elixis Basic/Pro and X-Adaptor Plug-In!
Follow this tutorial and you will do it faster than any other
programmer available, with a hot-swap!
This tutorial is compatible with v1.0/v1.1/v1.2 Xbox versions. |
|
|
 |
| |
 |
Insert
X-elixis Basic/Pro Plug-In with a programed SST,
into X-elixis LPC connector,
Power ON your Xbox
and boot Evolution-X Software. |
|
 |
Now
unplug X-elixis Pro Plug-In,
while your Xbox is still Power ON. |
 |
Now
plug X-Adaptor from the black side.
|
 |
And
now plug the cheapmod you want to flash via Evolution-X Software. |
|
| |
 |
Where
to get +5V from Xbox motherboard?
Connect with a wire from Xbox motherboard +5v
to X-Programmer +5V pad.
This extra wire to solder required only for Xecuter Modchips! |
|
 |
How
to avoid X2 Lite wires?
Do this simple fix, on the back side of X2 Lite pcb,
connecting these 2 oins togather! |
 |
How
toset X2 Lite write enable?
Remove the jumpers showned in the photo! |
|
|
|
|
