Untitled Document


- About Us - Contact Us - Forum -
Modchips	Plug-Ins	Adaptors	Programmers

- Installation Info

- Upgrade Info

- Program Info

- Technical Info

- News

- Tutorials

- Downloads

- Xbox Models

- Australia www.hi-voltage.org

- France www.gueux.net

- Greece www.modchip.gr

- Norway www.mod4you.com

- UK www.modcity.co.uk

- Become a Distributor

Free counter

Installation Tips /

Installation of X-elixis LPC connector
is very easy with the right tools:
1. Solder Iron 15-25W.
2. Flux Liquid.
3. Pincers to plug the Plug-Ins.
4. Kynar type wire.

		As soos as you find the right place of X-elixis LPC connector, tight the screw that will hold X-elixis LPC connector like a third hand! Add some flux over the needed pads, to speed up your installation!
		Now touch each hole of the LPC bus with your solder iron for just a sec! Minimum ammount of soldering required, which can save you from a splash in the mainboard!
		How to test the Installation: 1. To test the installation lift X-elixis Flexible pcb, to see underneath if all holes are steadilly connected!
		2. To test the installation in action, simply plug an X-elixis Plug-In and power on your console: - If you get a continuous light you have a succesfull installation! - If you get a flashing light then you have to recheck your soldering!
		Finally add a piece of doublesided sticker to tight X-elixis LPC connector and you Finished!