| |
 |
Cut
a wire 2 cm length,and solder one edge to "D0" Point.
Kynar type wire is recomended,
Caution: Do not pull the wire
while it is connected to the pad,
cause you may remove "D0" trace!
Always test if the connection is steady. |
|
 |
Connect
the one edge of the wire
to Xbox D0 point. |
 |
Presolder
the pad on X-elixis LPC Connector.
Don't worry about the plastic,
cause it is made from Polymide,
and can stand till 300 degrees! |
 |
....you
FINISHED, ONCE and for ALL!
X-elixis LPC Connector is installed,
and from now on,
you can do everything you want
with just Plug&Play actions! |
|
